Built a scanner? Started to build a scanner? Record your progress here. Doesn't need to be a whole scanner - triggers and other parts are fine. Commercial scanners are fine too.
BTW, I'm scheming up a new version of this that adapts to the Hackerspace scanner. It won't have the pressers with slotted aluminum arms and plastic vees, but will include the other servo gadgets.
You're going to raise the book into the platen by motor control? Hmmm... That probably rules out R/C servos for it. Turning a 5 start screw by a stepper might do it, like a NEMA 23, allowing precise control around the glass. Perhaps a 12V windshield wiper motor would be cheaper, and it would certainly have enough torque. Not much room to place the turning arms inside the box and still get them out of the way of the platen.
My idea is to use a 12v wiper motor and mount it outside the scanner with a link to the pull down handle. Looking at this wiper motor with integral motor control: http://www.devicecraft.com/wimoseco.html
Wow, I hadn't seen a controller like that which would allow you to use a big motor as a R/C servo (pulse width positioning). Thanks for the link to that. Kinda pricey, though.
So, how to control it? Micro switches to detect limit of travel?
revwarguy wrote:Wow, I hadn't seen a controller like that which would allow you to use a big motor as a R/C servo (pulse width positioning). Thanks for the link to that. Kinda pricey, though.
So, how to control it? Micro switches to detect limit of travel?
Making a new triggering gadget that rips off Dan's dual cable lever idea. Found I didn't have a good way to manually trigger the cameras to re-shoot missed pages. Pressing on the cameras didn't work because of the shakes. Although this system may be a bit more complex, it's cheaper because only one servo. I still have to make the other camera mount before I know if it will work or not.
Awesome! A bit ghetto, but hey, if it works... I like the spring between the servo and the handle. It's little things like that which I would probably never think of!
i have never built a scanner but i plan to thats why i signed up, this one looks amazing i wish i knew how to put something like that together lol. mine will probably be just basic camera, cradle, glass to hold the book and whatever other parts i need. i hope that sometime you develop this to scan paperbacks, especially small ones. i have a lot of paperbacks as well as hardcovers. i probably wont ever have something like this though, but its just a thought, i know it would be kinda hard. the only problem i see with an automatic book scanner is how your supposed to know if all the pages were scanned. you would have to have a VERY accurate scanner that you have full trust in to be able to scan an entire book and be confident it turned out alright, which is one reason i might just stick with the easier to build method of manually turning the pages, although it may take me a LONG time.
how long should it take to scan 223 books? i started going through my books and looking at the last page number and typing it on my computer. i've got most of them but i still got some more to go, but the pages i have so far add up to 60217 pages, how long would it take to scan them all? is it even possible? i probably wont do much of the rest, maybe i will just pick a few more.
oh and one more thing, is there a place for introductions? the start here thread is locked.