This is GORGEOUS, Dan. Really fantastic. I'm looking forward to this.
As always, if there's some way I can help out.
A DIY Book Scanner In Every Hackerspace /DIY Kit
Moderator: peterZ
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
The opinions expressed in this post are my own and do not necessarily represent those of the Canadian Museum for Human Rights.
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
This is so great. A lot of smart new design features. I do think a lot of hackerspaces (and others) will get one.
Have you tried some designs with the mechanical triggering automated (based on the book modules upward movement)? If so, what's your take on it?
I imagine that strain from pulling the handbrake is a bigger risk than strain from raising/lowering the module, given the neat counterbalancing. A challenge is to get a autotrigger to work reliably given that
1. different books differ in "height" (= thickness) and
2. the same book varies in "height" when you're scanning different parts of it.
Problem 1 seems easy to solve through a one time per book calibration of the trigger part. Problem 2 could be trickier. Maybe the platen could be made to move 1 cm upwards/downwards when pushed/not pushed by the manually lifted book module. That platen motion could be transferred to mechanical camera triggering. That could solve problem 2.
Have you tried some designs with the mechanical triggering automated (based on the book modules upward movement)? If so, what's your take on it?
I imagine that strain from pulling the handbrake is a bigger risk than strain from raising/lowering the module, given the neat counterbalancing. A challenge is to get a autotrigger to work reliably given that
1. different books differ in "height" (= thickness) and
2. the same book varies in "height" when you're scanning different parts of it.
Problem 1 seems easy to solve through a one time per book calibration of the trigger part. Problem 2 could be trickier. Maybe the platen could be made to move 1 cm upwards/downwards when pushed/not pushed by the manually lifted book module. That platen motion could be transferred to mechanical camera triggering. That could solve problem 2.
- rob
- Posts: 773
- Joined: 03 Jun 2009, 13:50
- E-book readers owned: iRex iLiad, Kindle 2
- Number of books owned: 4000
- Country: United States
- Location: Maryland, United States
- Contact:
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
Nice catch -- there are a bunch of those double fillets in the file. When I create the 4'x4' files, I'll see if I can correct those. I kind of like corner fillets myself, but dogbones are fine.miket161 wrote:Your cutouts only need the notches in one direction so that a square part will fit. This will give more bearing surface and make it a lot stronger..!
--Rob
The Singularity is Near. ~ http://halfbakedmaker.org ~ Follow me as I build the world's first all-mechanical steam-powered computer.
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
You could have an over-travel mechanism that allows the pull down handle to go a bit farther down after the book hits the platen. There could be a spring loaded lever holding the handle that attaches to the pull-down crossbar. Cables from this linkage run to the shutter pressers. An over-travel trigger wouldn't care if the book was thick or thin. An added benefit is the over-travel spring will tend to limit the pressure on the platen. If you pull down till you hear or feel the click of the shutters you'll never pull too hard.dtic wrote:This is so great. A lot of smart new design features. I do think a lot of hackerspaces (and others) will get one.
Have you tried some designs with the mechanical triggering automated (based on the book modules upward movement)? If so, what's your take on it?
I imagine that strain from pulling the handbrake is a bigger risk than strain from raising/lowering the module, given the neat counterbalancing. A challenge is to get a autotrigger to work reliably given that
1. different books differ in "height" (= thickness) and
2. the same book varies in "height" when you're scanning different parts of it.
Problem 1 seems easy to solve through a one time per book calibration of the trigger part. Problem 2 could be trickier. Maybe the platen could be made to move 1 cm upwards/downwards when pushed/not pushed by the manually lifted book module. That platen motion could be transferred to mechanical camera triggering. That could solve problem 2.
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
The economically functional focus of this design is ideal. The ingeniously elegant execution is a success, not because it's done but because it's in the place where the core idea is so solid, further revision will naturally evolve.
- daniel_reetz
- Posts: 2812
- Joined: 03 Jun 2009, 13:56
- E-book readers owned: Used to have a PRS-500
- Number of books owned: 600
- Country: United States
- Contact:
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
I made it to LA (my new temporary home) and I am going to spend some time answering questions today. Love the discussion going on here.
- rob
- Posts: 773
- Joined: 03 Jun 2009, 13:50
- E-book readers owned: iRex iLiad, Kindle 2
- Number of books owned: 4000
- Country: United States
- Location: Maryland, United States
- Contact:
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
There's a bug in the fixture (yellow) part: one of the fixtures needs to be reflected vertically.
The part:
The fixture which needs to be reflected:
The part:
The fixture which needs to be reflected:
The Singularity is Near. ~ http://halfbakedmaker.org ~ Follow me as I build the world's first all-mechanical steam-powered computer.
- rob
- Posts: 773
- Joined: 03 Jun 2009, 13:50
- E-book readers owned: iRex iLiad, Kindle 2
- Number of books owned: 4000
- Country: United States
- Location: Maryland, United States
- Contact:
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
If I recall correctly, you put the glass in the grooves and then put a shim in to hold the glass in place. This way you can take the shim out, spread the glass out (to account for spiral-bound books) and reshim.miket161 wrote:I noticed in your drawings that you have a 1/4" wide groove for the glass and it looks like it's only held in at the ends.
What's the story with this?
The Singularity is Near. ~ http://halfbakedmaker.org ~ Follow me as I build the world's first all-mechanical steam-powered computer.
- rob
- Posts: 773
- Joined: 03 Jun 2009, 13:50
- E-book readers owned: iRex iLiad, Kindle 2
- Number of books owned: 4000
- Country: United States
- Location: Maryland, United States
- Contact:
Re: A DIY Book Scanner In Every Hackerspace /DIY Kit
I think Corel Draw probably can't do Dog-Bone and T-Bone fillets. Of course, neither can Illustrator.miket161 wrote:I was also thinking about simplifying some of the design. Basically just leaving more material for strength. It will
probably be a little more stable when using it upside down for paperbacks. Keeping it from racking.
The Singularity is Near. ~ http://halfbakedmaker.org ~ Follow me as I build the world's first all-mechanical steam-powered computer.