Daniel Reetz, the founder of the DIY Book Scanner community, has recently started making videos of prototyping and shop tips. If you are tinkering with a book scanner (or any other project) in your home shop, these tips will come in handy. https://www.youtube.com/channel/UCn0gq8 ... g_8K1nfInQ

Self-Adjusting Spine Support

Built a scanner? Started to build a scanner? Record your progress here. Doesn't need to be a whole scanner - triggers and other parts are fine. Commercial scanners are fine too.
M@rtijn
Posts: 77
Joined: 13 Feb 2012, 16:18
Country: Netherlands

Re: Self-Adjusting Spine Support

Post by M@rtijn » 24 Jul 2012, 18:09

Idea for additional features when a fixed cradle is needed.
fixed_cradle.jpg

pablitoclavito
Posts: 39
Joined: 12 Sep 2012, 16:54
E-book readers owned: Iliad
Number of books owned: 200
Country: Spain

Re: Self-Adjusting Spine Support

Post by pablitoclavito » 13 Sep 2012, 12:24

Hi all!

First, I would like to thank you for this great forum and all the people involved.

Regarding the problem of the arching in this self-adjusting spine system, I would like to offer some ideas I had recently.

Why don't you keep the string the closest as possible to the spine of the book?
I thought you could drill the cradle wings, and let the string pass through the drill.
The 2 drills should be done in the top of the lowest edge of the cradle wing. One drill in the middle of each of the wings.

As my English is a little poor, maybe some drawings would make myself clearer.

Image
scanning first page
The drills are the hidden lines.

Image
in the middle of the book

Image
scanner in stand-by or scanning very thin material/loose paper

As my drilling habilities are equal to zero, I don't know of the possible difficulties in making these 2 drills, so maybe this is just a crazy idea.

I came with another idea too. Maybe you have noticed some kind of triangle piece just in the middle of the cradle wings, in the previous drawings.
I have added it so it would help the sytem rest when scanning thin material or loose paper, and let the system fit perfectly when in the lowest position.
Or keep the whole cradle steady when not in use, or while adjusting things, the string...
You can see this piece in this drawing. See that space in the middle: is occupied by the string, passing through. The amount of wood you remove from there and the way you do it is up to you.

Image

Again, it's very easy to draw this piece, but I don't know how you would cut it in the real world.

And now from the top:
Image

Another alternative would be to use a surface instead of a string

Image
surface alternative_first page

Image
surface alternative_middle of the book

Image
surface alternative_view from the top

In the right cradle wing (red clamps) you would use adjustable clamps/L brackets (something like the ones used in the glass fixing in Daniel's assembly video in youtube http://www.youtube.com/watch?v=gdPOAcMi4pw) to let more or less surface to be in the middle of the cradle wings (depending on the spine of the book). You would adjust them each time you scan a different book (books with different spine thickness)
Same clamps in the left cradle wing (clamps in yellow). In this case, the clamps would be fixed permanently.
Note that with this surface solution, the triangle piece doesn't need to be cut in the middle
Also note that the clamps (L brackets or whatever other fixing system you use, you name it) should be place in the lowest part, on the edge of the cradle wings. In the top of the wings you can place them wherever you want.
Maybe we could save materials by clamping just in the lowest part of the wings? (two yellow clamps in the lowest part of the left wing + two red clamps in the lowest part of the right wing)

How this surface will wear on those edges? I don't know...
So the surface needs to have some thickness (maybe a drawer liner?)
Ideally it would be kind of sticky, and black matte color.

And that was my brainstorming for today!

Finally, I guess I had the idea of this system right, but I haven't seen a video of it
So jck57 would you please post a short video?

Thank you

User avatar
davidlandin
Posts: 134
Joined: 22 Feb 2012, 15:44
E-book readers owned: kindle
Number of books owned: 0
Country: UK

Re: Self-Adjusting Spine Support

Post by davidlandin » 15 Aug 2013, 07:57

Self adjusting cradle.png
Side view of self adjusting cradle
Self adjusting cradle.png (80.83 KiB) Viewed 4365 times
An idea I am working on is to make a completely different style of cradle, which is suspended at the top left and top right, The cradle basically hangs. The two plywood sides of the cradle are hinged at the top, and attached to each other by a length of glued-on fabric. This allows either side of the cradle to move freely depending on the number of pages of the book resting on each side of the cradle. I'd be interested to hear of any snags or problems that this might cause.

BTW I'm using drawer runners under the baseboard to allow for the book to be centered under the platen.

User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Self-Adjusting Spine Support

Post by jck57 » 23 Oct 2013, 20:59

M@rtijn wrote:Based on a BGA kit. A single-handed option to adjust two clips for locking and deskewing small book covers.

The clips move simultaneously over a threaded rod with one side right hand thread and the other left hand tread.

The thread is placed through drilled holes on the sides and a routed slot on top of each cradle wing.
bookcover_lock.jpg
I used much of M@rtijn's idea for my own cradle clips : http://www.diybookscanner.org/forum/vie ... 6&start=10.

Only long after making the clips and posting my pics did I go back and re-discover M@rtijn's design which inspired my own without my realizing it at the time. Thanks, M@rtijn for your many great ideas and beautiful illustrations.

Post Reply