Are the scanner's cameras capable of capturing images at this point?
If so, after having mounted the light, do you see a reflection of the light source in the camera's view? Looking at the dimensions and angles of the platen and camera configuration shown in your first video, it looks like the cameras will always see a reflection of the light source with the current design.
You should also note that if the angle between the two platens is only 90 degrees, you'll see a reflection of the adjacent platen (page) in the captured image. The angle between the platens should be closer to 100 degrees to prevent this and to be able to position the light closer to the platen 'v'.
Libreflip - a new open source page-turning bookscanner
Moderator: peterZ
- Aegre Reminiscens
- Posts: 40
- Joined: 04 Mar 2014, 00:53
- E-book readers owned: kindle
- Number of books owned: 0
- Country: Germany
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
Yes and no. In Episode 24, they worked already, but more software development introduced a Bug, which is why currently they dont work. The Bug will be fixed, but the lovely Programmer is currently rather busy and does not have much free time to invest in Libreflip. I am very thankful for the volunteer-programmers helping me with this project, so I am in no position to complain about the delay. At some point they will work again. Hopefully soon.
Thank you for these thoughts. I hope I don't have to redesign the suction box (and the Book holder), but if I have to, and your thoughts sound a bit like that, then I will. Certainly I need more testing, before I will make that decision. Unfortunately, a 100° angle at that location will make the suction box considerably more difficult to be build by others, so I have to think about how I can reduce that complexity.dpc wrote: ↑15 Nov 2018, 16:17 If so, after having mounted the light, do you see a reflection of the light source in the camera's view? Looking at the dimensions and angles of the platen and camera configuration shown in your first video, it looks like the cameras will always see a reflection of the light source with the current design.
You should also note that if the angle between the two platens is only 90 degrees, you'll see a reflection of the adjacent platen (page) in the captured image. The angle between the platens should be closer to 100 degrees to prevent this and to be able to position the light closer to the platen 'v'.
All my projects are documented here: http://www.ijon.me
- Aegre Reminiscens
- Posts: 40
- Joined: 04 Mar 2014, 00:53
- E-book readers owned: kindle
- Number of books owned: 0
- Country: Germany
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
Finally! The page-turning mechanism works and here is the Episode that shows it!
[youtube]https://www.youtube.com/watch?v=WPERFoqiDD[/youtube]
The project also has a twitter account, if you like to stay updated about the progress.
https://twitter.com/libreflip/status/11 ... 0855136257
[youtube]https://www.youtube.com/watch?v=WPERFoqiDD[/youtube]
The project also has a twitter account, if you like to stay updated about the progress.
https://twitter.com/libreflip/status/11 ... 0855136257
All my projects are documented here: http://www.ijon.me
- Aegre Reminiscens
- Posts: 40
- Joined: 04 Mar 2014, 00:53
- E-book readers owned: kindle
- Number of books owned: 0
- Country: Germany
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
I released two new Episodes:
E31 https://www.youtube.com/watch?v=JNOPI8aZbpM
"building Libreflip - E31 - Exchanging the Stepper Driver and discussing "COTS" vs "Custom PCB"
In this Episode we discuss in great length the design decision for Consumer-off-the-shelf components "COTS" and against a "custom PCB", because we are not too sure anymore wether this decision was the right one! Please do pitch in to the discussion and share your opinion either here or over in the coimments.
and in
E32 https://www.youtube.com/watch?v=4ebi4wvrnyY
building Libreflip - E32 - The new Stepper Driver works and I am taking apart the old scanner.
We get the new stepper driver working and then I am talking about the predecessor Libreflip and disassemble the machine.
E31 https://www.youtube.com/watch?v=JNOPI8aZbpM
"building Libreflip - E31 - Exchanging the Stepper Driver and discussing "COTS" vs "Custom PCB"
In this Episode we discuss in great length the design decision for Consumer-off-the-shelf components "COTS" and against a "custom PCB", because we are not too sure anymore wether this decision was the right one! Please do pitch in to the discussion and share your opinion either here or over in the coimments.
and in
E32 https://www.youtube.com/watch?v=4ebi4wvrnyY
building Libreflip - E32 - The new Stepper Driver works and I am taking apart the old scanner.
We get the new stepper driver working and then I am talking about the predecessor Libreflip and disassemble the machine.
All my projects are documented here: http://www.ijon.me
- Aegre Reminiscens
- Posts: 40
- Joined: 04 Mar 2014, 00:53
- E-book readers owned: kindle
- Number of books owned: 0
- Country: Germany
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
Hi,
two new Episodes are out!
E33 https://youtu.be/at-ZCxXzEHQ building Libreflip - E33 - Seaching reflections! Do I need to rebuild the suction box?
E34 https://youtu.be/fOm8w_K2Xq8 building Libreflip - E34 - UPDATE What's happening?
I hope you enjoy, and if you haven't yet, please subscribe to my channel:
https://www.youtube.com/c/ijonberlin
two new Episodes are out!
E33 https://youtu.be/at-ZCxXzEHQ building Libreflip - E33 - Seaching reflections! Do I need to rebuild the suction box?
E34 https://youtu.be/fOm8w_K2Xq8 building Libreflip - E34 - UPDATE What's happening?
I hope you enjoy, and if you haven't yet, please subscribe to my channel:
https://www.youtube.com/c/ijonberlin
All my projects are documented here: http://www.ijon.me
- Aegre Reminiscens
- Posts: 40
- Joined: 04 Mar 2014, 00:53
- E-book readers owned: kindle
- Number of books owned: 0
- Country: Germany
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
Thanks, dpc for this input.dpc wrote: ↑15 Nov 2018, 16:17 You should also note that if the angle between the two platens is only 90 degrees, you'll see a reflection of the adjacent platen (page) in the captured image. The angle between the platens should be closer to 100 degrees to prevent this and to be able to position the light closer to the platen 'v'.
I've been worrying a great amount about your post. In the most recent Episode, E35, I explore this possibility, of having used the wrong geometry and find out if I actually have to rebuild the suction box.
Here is the freshly released Episode 35! Have fun watching, and if you haven't yet, please consider to subscribe to my channel.
[youtube]https://www.youtube.com/watch?v=er0jNeZhqQw
[/youtube]
All my projects are documented here: http://www.ijon.me
- daniel_reetz
- Posts: 2812
- Joined: 03 Jun 2009, 13:56
- E-book readers owned: Used to have a PRS-500
- Number of books owned: 600
- Country: United States
- Contact:
Re: Libreflip - a new open source page-turning bookscanner
Great work, Ijon!