Hi all, I'm a complete newbie to this so please pardon me if these are silly questions. First and foremost, what camera and lenses would be recommended for this? I have a Nikon D5600 and the 18-55mm kit lens. Will these work or should I get another type of lens?
A second question is where to get camera gear without spending a ton of money. I'm on a budget but I don't want to deal with buying used on Craigslist or eBay or something like that. I thought I might try B&H Photo or maybe Adorama. I've bought a few small things from B&H before but never used Adorama (though it sounds reputable according to https://www.photographytalk.com/adorama-review). At any rate, I'm anxious to get started so any feedback on these subjects would be greatly appreciated.
Thank you!
Best camera for scanning?
Moderator: peterZ
-
- Posts: 139
- Joined: 18 Dec 2016, 17:13
- E-book readers owned: Calibre, FBReader
- Number of books owned: 7000
- Country: USA
Re: Best camera for scanning?
I don't thing there is a "best" camera for scanning. Almost any camera with a decent resolution will work. More important is how you plan to scan. Are you building a 2 camera scanner or a 1 camera scanner?
For a single camera scanner you will need have a camera with a good resolution (about 2 megapixels or more). Zoom is kind of optional. My scanner is described in post viewtopic.php?f=14&t=3467. I don't use any zoom. I positioned the camera in a fixed position so that the unzoomed field of view just covers the area of the largest book I will be scanning. The camera mount is a little more complicated than it really needs to be because it is built so I can use 2 different cameras. The primary camera is a Canon Elph 160. The secondary is the higher quality Sony RX10 II. However, I have been getting good results with the Canon so I have never used the Sony for scanning with this scanner.
If you are planning on a 2 camera system you may want to look for cameras that can be remotely controlled, so you can get software to at least semi-automate them. Of course this will cost more, and you will need the cameras to be a matched pair. Actually, thinking about it you might not need to do it software wise. You could rig a system that would mechanically push the 2 buttons at the same time. There have been several systems described on the forum that would do this. Then there is free software that will combine the pictures from the 2 cameras into the correct sequence.
Hope this helps. Good luck.
Bill
For a single camera scanner you will need have a camera with a good resolution (about 2 megapixels or more). Zoom is kind of optional. My scanner is described in post viewtopic.php?f=14&t=3467. I don't use any zoom. I positioned the camera in a fixed position so that the unzoomed field of view just covers the area of the largest book I will be scanning. The camera mount is a little more complicated than it really needs to be because it is built so I can use 2 different cameras. The primary camera is a Canon Elph 160. The secondary is the higher quality Sony RX10 II. However, I have been getting good results with the Canon so I have never used the Sony for scanning with this scanner.
If you are planning on a 2 camera system you may want to look for cameras that can be remotely controlled, so you can get software to at least semi-automate them. Of course this will cost more, and you will need the cameras to be a matched pair. Actually, thinking about it you might not need to do it software wise. You could rig a system that would mechanically push the 2 buttons at the same time. There have been several systems described on the forum that would do this. Then there is free software that will combine the pictures from the 2 cameras into the correct sequence.
Hope this helps. Good luck.
Bill