Has anyone checked out this newest Zebralight headlamp?
http://www.zebralight.com/H51-Headlamp- ... _p_37.html
LED: Cree XP-G Cool White (color temperature 6100-6500 K)
User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
High: H1 200 Lm (0.9 hrs) or H2 140 Lm (1.7 hrs) / 100 Lm (2.4 hrs) / 4Hz Strobe
Medium: M1 30 Lm (12 hrs) or M2 8 Lm (39 hrs)
Low: L1 2.5 Lm (3 days) or L2 0.2 Lm (16 days)
Light output are out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries.
200, 140, 30, 8 and 2.5 Lumen output are current regulated. 100 and 0.2 Lumen output are PWM generated.
Voltages: 0.7V - 2.5V
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
Parasitic Drain: Negligible (equivalent to 16 years)
80Â° spill beam spread
11Â° (3.8 feet at 20 feet) hot spot
Diameter: 0.90 inch (23 mm)
Length: 3.2 inch (81 mm)
1.2 oz (35.8 gram)
2.2 oz (61.9 gram) with an Eneloop AA
3.0 oz (84.9 gram) with an Eneloop AA and headband
Electronic soft-touch switch, with a 200,000 cycle operating life
Smart user interface provides fast and easy access to all brightness levels
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
Durable natural hard anodized finish (Type III Class I)
SCHOTT ultra clear lens with anti-reflection coatings on both sides
Orange peel textured reflector
Glow In The Dark (GITD) silicone ring near the tail cap
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (1 meter 30 minutes)