Page 1 of 1

New page splitting approach

Posted: 16 May 2010, 13:30
by Tulon
Hi everyone,

Remember we were discussing ways to improve page splitting accuracy? The problem was that it's hard to tell a book's spine apart from its vertical edge. So, it seems I found a dead simple way for dealing with this problem: don't try to tell them apart, just cut off everything beyond both of them. On the GUI level this means adding a second cutter to the "Split Pages" stage for single page cases. I've implemented all of that and you can try it in the new build:
http://www.onlinedisk.ru/file/433777/

Re: New page splitting approach

Posted: 16 May 2010, 14:19
by daniel_reetz
posted to news... will test once I get my own computer set back up.

Re: New page splitting approach

Posted: 17 May 2010, 00:20
by spamsickle
Much better - completely eliminated "page split" errors on the two books I tested. That cuts down considerably on the manual intervention in the "select content" step too. Thanks!

Re: New page splitting approach

Posted: 17 May 2010, 09:37
by Misty
I haven't had the chance to test yet, but this sounds great! Thanks a lot, Tulon.