Renaming UI elements
Moderator: peterZ
Renaming UI elements
Hi everyone,
I think it's time to rename some unfortunately named UI elements in Scan Tailor. So far I am considering the following changes:
Split Pages -> Vertical Cuts
Select Content -> Content Box
Page Layout -> Margins
Align with other pages -> Match size with others
Comments? Other renaming suggestions?
I think it's time to rename some unfortunately named UI elements in Scan Tailor. So far I am considering the following changes:
Split Pages -> Vertical Cuts
Select Content -> Content Box
Page Layout -> Margins
Align with other pages -> Match size with others
Comments? Other renaming suggestions?
Scan Tailor experimental doesn't output 96 DPI images. It's just what your software shows when DPI information is missing. Usually what you get is input DPI times the resolution enhancement factor.
- daniel_reetz
- Posts: 2812
- Joined: 03 Jun 2009, 13:56
- E-book readers owned: Used to have a PRS-500
- Number of books owned: 600
- Country: United States
- Contact:
Re: Renaming UI elements
I really like the idea of these changes. Although "Match size with others" is more general, maybe "match size across pages" (or something like that) reads a little better. It could almost be 'match sizes' without losing much.
Re: Renaming UI elements
"Match size across pages" sounds like a global setting, doesn't it? In reality it's a per-page setting. "Match size with other pages" is a little long but should still fit in a single line.daniel_reetz wrote:I really like the idea of these changes. Although "Match size with others" is more general, maybe "match size across pages" (or something like that) reads a little better. It could almost be 'match sizes' without losing much.
Scan Tailor experimental doesn't output 96 DPI images. It's just what your software shows when DPI information is missing. Usually what you get is input DPI times the resolution enhancement factor.
- daniel_reetz
- Posts: 2812
- Joined: 03 Jun 2009, 13:56
- E-book readers owned: Used to have a PRS-500
- Number of books owned: 600
- Country: United States
- Contact:
Re: Renaming UI elements
Yes, it does, you're right.Tulon wrote: "Match size across pages" sounds like a global setting, doesn't it? In reality it's a per-page setting. "Match size with other pages" is a little long but should still fit in a single line.
-
- Posts: 596
- Joined: 06 Jun 2009, 23:57
Re: Renaming UI elements
I'd go with "Match page sizes" or "Equalize page sizes" -- to me, the fact that they're being matched (or equalized) with other pages is strongly enough implied.
Also, I think based on past discussions, the most unfortunately named element is "Deskew", which most people expect to address things like keystoning. If you're renaming these en masse, maybe "Rotate page" or "Level page" would be less apt to be misinterpreted.
Also, I think based on past discussions, the most unfortunately named element is "Deskew", which most people expect to address things like keystoning. If you're renaming these en masse, maybe "Rotate page" or "Level page" would be less apt to be misinterpreted.
Re: Renaming UI elements
Same problem as with Dan's suggestion: they sound like a global setting, but it's not!spamsickle wrote:I'd go with "Match page sizes" or "Equalize page sizes" -- to me, the fact that they're being matched (or equalized) with other pages is strongly enough implied.
I think Deskew / Skew Correction are commonly accepted terms for this type of thing. In addition, I don't particularly like "Rotate page" (conflicts with Fix Orientation) or "Level Page".Also, I think based on past discussions, the most unfortunately named element is "Deskew", which most people expect to address things like keystoning. If you're renaming these en masse, maybe "Rotate page" or "Level page" would be less apt to be misinterpreted.
Scan Tailor experimental doesn't output 96 DPI images. It's just what your software shows when DPI information is missing. Usually what you get is input DPI times the resolution enhancement factor.
-
- Posts: 290
- Joined: 20 Jun 2009, 12:19
- E-book readers owned: SONY PRS-505, Kindle DX
- Number of books owned: 9999
- Location: Grand Rapids, MI
- Contact:
Re: Renaming UI elements
Let me add my I vote for another word than deskew. Websters' Dictionary defines skew:
1 : to take an oblique course
2 : to look askance
To my mind, these are evocative of keystone distortion. In particular, the definition of oblique:
1 a : neither perpendicular nor parallel : inclined
The semantic arguments are always annoying. "Deskew" raises false hopes of the correction of keystone distortion. Do I have a constructive suggestion? Not a good one. Straighten. When one notices a picture on the wall is not sitting level, one straightens it by rotating it. However, this suggestion has its own weakness in that it may evoke false hopes that curved lines will be made straight! So, I'm not advocating for anything as much as against "deskew"
1 : to take an oblique course
2 : to look askance
To my mind, these are evocative of keystone distortion. In particular, the definition of oblique:
1 a : neither perpendicular nor parallel : inclined
The semantic arguments are always annoying. "Deskew" raises false hopes of the correction of keystone distortion. Do I have a constructive suggestion? Not a good one. Straighten. When one notices a picture on the wall is not sitting level, one straightens it by rotating it. However, this suggestion has its own weakness in that it may evoke false hopes that curved lines will be made straight! So, I'm not advocating for anything as much as against "deskew"
Re: Renaming UI elements
Steve,
In research papers they call it Skew Correction and in other post-processing software they call it Deskew. Maybe it's not ideal, but everyone uses it. "Straighten" is even worse, IMHO, as it implies line uncurling.
In research papers they call it Skew Correction and in other post-processing software they call it Deskew. Maybe it's not ideal, but everyone uses it. "Straighten" is even worse, IMHO, as it implies line uncurling.
Scan Tailor experimental doesn't output 96 DPI images. It's just what your software shows when DPI information is missing. Usually what you get is input DPI times the resolution enhancement factor.
Re: Renaming UI elements
Interesting, my view is that you got it mostly right first time around Tulon
I wouldn't change 'Split pages', it says exactly what it means. If you do change it however it should be 'Cut' singular, not 'Cuts' plural
I wouldn't change 'Select content', it says exactly what it means.
I might change 'Page layout' to 'Margins', it's probably more accurate as to what it's doing.
I probably would change 'Align with other pages' to 'Match size to other pages', it's clearer to the user what it means.
I'm afraid I completey agree with 'Deskew' nay-sayers. It really does imply it's going to do some geometric transformation rather than mere rotation. I would suggest 'Horizontal align' or 'Text align' or 'Horizontally align text', like StevePoling almost anything but 'deskew'.
One of my degrees was in Ergonomics and I well remember the principle of 'affordances', that is that something told you what it was for without needing to tell you. In other words whn you looked at something you instinctively knew what to do with it - like a door handle affords 'pulling' whereas a door plate affords 'pushing' (ever since I've wondered why you'd put a handle on something that can only be pushed!). Likewise with what we've got here, not only should the text explain what it's about, it should also afford what it's about. Glue words don't matter much but things like 'Horizontal', 'Split', 'Select', Match' all clearly afford what they're doing by themselves without need for much else. So I think this is a valuable discussion. Perhaps in time some small Icons that also afford what's being done at that step would improve things too....
I wouldn't change 'Split pages', it says exactly what it means. If you do change it however it should be 'Cut' singular, not 'Cuts' plural
I wouldn't change 'Select content', it says exactly what it means.
I might change 'Page layout' to 'Margins', it's probably more accurate as to what it's doing.
I probably would change 'Align with other pages' to 'Match size to other pages', it's clearer to the user what it means.
I'm afraid I completey agree with 'Deskew' nay-sayers. It really does imply it's going to do some geometric transformation rather than mere rotation. I would suggest 'Horizontal align' or 'Text align' or 'Horizontally align text', like StevePoling almost anything but 'deskew'.
One of my degrees was in Ergonomics and I well remember the principle of 'affordances', that is that something told you what it was for without needing to tell you. In other words whn you looked at something you instinctively knew what to do with it - like a door handle affords 'pulling' whereas a door plate affords 'pushing' (ever since I've wondered why you'd put a handle on something that can only be pushed!). Likewise with what we've got here, not only should the text explain what it's about, it should also afford what it's about. Glue words don't matter much but things like 'Horizontal', 'Split', 'Select', Match' all clearly afford what they're doing by themselves without need for much else. So I think this is a valuable discussion. Perhaps in time some small Icons that also afford what's being done at that step would improve things too....
Re: Renaming UI elements
It used to be single cut or no cut depending on the mode. Now there are two cutters for the single page mode. You could also interpret the plural form "cuts" as referring to multiple pages, just like the current "Split Pages" does.phaedrus wrote:I wouldn't change 'Split pages', it says exactly what it means. If you do change it however it should be 'Cut' singular, not 'Cuts' plural
OK, "Horizontal align(ment?)" sounds acceptable.I'm afraid I completey agree with 'Deskew' nay-sayers. It really does imply it's going to do some geometric transformation rather than mere rotation. I would suggest 'Horizontal align' or 'Text align' or 'Horizontally align text', like StevePoling almost anything but 'deskew'.
More opinions please!
"Split Pages" or "Vertical Cuts"?
Is "Horizontal Alignment" OK?
I guess we already reached consensus on:
Page Layout -> Margins
Align with other pages -> Match size with other pages
Scan Tailor experimental doesn't output 96 DPI images. It's just what your software shows when DPI information is missing. Usually what you get is input DPI times the resolution enhancement factor.